Plein de nouveautés en ce début d'année chez Vanguard Miniatures (figurines utilisables avec toutes les versions d'Epic jusqu'à Legions Imperialis) :
Novan Regulars – Warrior II Dozer Blades Set
Citation :Set contains:
4 x dozer blades
4 x spiked rams
Note:
1. Designed to fit warrior II vehicle hulls
https://vanguardminiatures.co.uk/shop/no...lades-set/
Renegade – Dragon II Flamethrower Tanks
Citation :Set contains:
3 x renegade dragon II hulls
6 x turrets (2 variants)
6 x fuel tanks (2 variants)
3 x hull MG’s
Notes:
1. You can build three of either variant vehicles
2. Image shows both variant designs
3. Warrior II spiked ram not included
https://vanguardminiatures.co.uk/shop/re...wer-tanks/
Renegade – Self-propelled Artillery Set
Citation :Set contains:
3 x renegade SP artillery hulls
3 x short bow cannons
3 x heavy mortars
3 x hull MG’s
Notes:
1. This set contains the parts to build 3 cannon or 3 heavy mortar vehicles
2. Image shows one of each variant
3. The renegade militia artillery crew set contains plinthless figures that can be used on these vehicles
https://vanguardminiatures.co.uk/shop/re...llery-set/
Renegade – Self-propelled Field Mortars Set
Citation :Set contains:
3 x renegade SP artillery hulls
3 x heavy field mortars
3 x heavy quad launchers
3 x hull MG’s
Note:
1. This set contains the parts to build 3 mortar or 3 quad launcher vehicles
2. Image shows one of each variant
3. The renegade militia artillery crew set contains plinthless figures that can be used with these vehicles
https://vanguardminiatures.co.uk/shop/re...rtars-set/
Cybershadow Technocracy Heavy Recon Stalker- Jackal II
Citation :**Cybershadow Technocracy Jackal II -** The Jackal II represents a generational leap in Cybershadow walker design heretofore unseen in Novan space. Though bearing the name of its predecessor, the Jackal II is a completely new chassis and has been rebuilt by the Technocracy from the ground up around a newer, more advanced power system.
Although the Jackal II is considered a light recon stalker, it still towers above even super-heavy tanks and other war engines common to Novan space. Each Jackal has two primary weapon hardpoints in the arms capable of mounting a wide variety of weaponry, ensuring commanders have the tools to engage any threat they should encounter. Complementing its primary weaponry are two modular hardpoints above the powercore coolant housings. These offer additional utility and flexibility by adding supplemental comms, optics, sensors, and countermeasures to the already robust systems of the standard Jackal II.
Tactically, Cybershadow Jackals can be found ranging far ahead of heavier walker battle squadrons, providing vital intel and conducting probing attacks ahead of the main assault. They are extremely agile for their size and can cover ground at phenomenal speed when necessary. Although lightly armed in comparison to the heavier battleline walkers, a single Jackal still possesses enough firepower to easily decimate lesser enemy formations. Indeed, Jackals have even been known to form the spearhead of smaller assaults should field commanders be unable to acquire heavier assets.
Notes:
1. PDF model assembly guide can be found in the Rules Category on this site.
2. Model shown mounted on an 80mm round spinner base from Troublemaker Games not included but available in store.
3. Full multi-part resin cast kit with metal cast crew figures included.
4. Approximate height of model dependent on pose, 68mms to 75mms.
5. Model painted by John Fielding.
https://vanguardminiatures.co.uk/shop/cy...jackal-ii/
Cybershadow Technocracy Heavy Recon Stalker – Vulture
Citation :**Cybershadow Technocracy Vulture -** The Vulture is a variant of the Jackal II recon chassis adapted to carry a larger ordnance piece than can usually be mounted on these “light” walkers. To accommodate the Vulture’s heavy dorsal weapon and weapon mount as well as its accompanying power systems, the engineering crew space within the torso has been replaced with a hardwired AI tasked with monitoring the Vulture’s power core and internal systems—oversight, usually provided by the onboard engineering drone on the Jackal II. To further offset the substantially increased weight of the dorsal cannon and systems but retain the speed necessary to achieve its fast-paced mission requirements, the Vulture also replaces the Jackal’s standard heavy weapons and arm mountings in favour of a pair of lighter defensive rotary cannon. Additionally, the notably lighter armour fitted to the lower legs of the Vulture is yet another visible example of the concessions to weight savings of the variant. In a long range, hull down fire support position, Vulture crews are able to mitigate the risk to their weaker legs through careful positioning.
The Vulture’s battlefield role is to provide integrated, long-ranged fire support to recon battle groups as well as serving in an overwatch/sniper capacity as required. Even within heavier Stalker cohorts, the Vulture is prized for its ability to quickly relocate, thereby opening opportunities for commanders to use the Vulture’s heavy dorsal weaponry for enfilading fire missions that would be impossible for a heavier chassis to fulfil.
Notes:
1. PDF model assembly guide can be found in the Rules Category on this site.
2. Model shown mounted on an 80mm round spinner base from Troublemaker Games, not included but available in store.
3. Full multi-part resin cast kit with metal cast crew figures included.
4. Model height approximately 68mms to 75mms dependent on pose, not including dorsal cannon.
5. Model painted by John Fielding.
https://vanguardminiatures.co.uk/shop/cy...r-vulture/