Vanguard Miniatures - 3, 6, 15 et 28mm

A whole bunch of new releases!

Novan Regulars – Jungle Rangers Scout Striders

The Scout class Strider light walker has served with Tusculum Nova’s Regular forces since there founding and has seen many variants over the years. Primarily used as a light scout vehicle and also occasionally in the infantry support roll, it can be found on practically ever world of the Commonwealth. In concert with its larger cousin the Battle class these two very successful walker designs have been pivotal in Tusculum Nova’s developing combat walker programs.

This set contain:

4 x Strider open cockpit hulls – Armed with vegetation chain-blade cutters and flamethrowers

4 x Strider legs in four poses

Notes:

Model height approx. 19mm

https://vanguardminiatures.co.uk/shop/no...-striders/

Renegade Militia – Casualties

Set contains:

30 x militia casualties in 5 poses (note these figures are double sided)

https://vanguardminiatures.co.uk/shop/re...asualties/

Renegade Militia – Heavy Anti-aircraft Gun Crews

Note these crew figures could also be used for large anti-tank gun crews or any other ordnance piece requiring large shells.

Set contains:

30 x gun crews in five poses

https://vanguardminiatures.co.uk/shop/re...gun-crews/

Renegade Militia – Artillery Crews

Set contains:

10 x crew for mounting on self-propelled guns or gun platforms (five poses)

22 x crew figures with regular figure bases (11 poses)

https://vanguardminiatures.co.uk/shop/re...ery-crews/

Renegade Militia – Infantry

Set contains:

40 x militia infantry (including 4 x squad leaders and 4 x grenade launcher operators)

https://vanguardminiatures.co.uk/shop/re...-infantry/

Renegade Militia – Specialists 1

Set contains:

4 x officers

2 x discipling masters

2 x radio operators

2 x standard bearers

2 x snipers

3 x light mortars with 2 crew each

3 x light quad mortars with 2 crew each

3 x twin heavy MG teams

3 x auto-cannon teams

3 x tank commander torsos

https://vanguardminiatures.co.uk/shop/re...ialists-1/

Renegade Militia – Specialists 2

Set contains:

15 x discipling masters (in 5 poses)

3 squad HMG teams (3 figure teams)

6 x light support weapons (3 x flamer, 3 x melta)

https://vanguardminiatures.co.uk/shop/re...ialists-2/

Some new releases!

First up...BLAST MARKERS! (Note de LTL : à Epic Armageddon les Pions d'Impact permettent de représenter visuellement l'attrition, les formations étant moins faciles à activer, moins efficaces au combat (tir et assaut) et plus proches de la démoralisation au fur et à mesure qu'on leur tire dessus et qu'elles accumulent les pertes)

Blast Markers (Large)

Set contains:

5 x large blast markers (3D printed)

8mm tall figure show for size purposes only.

https://vanguardminiatures.co.uk/shop/bl...ers-large/

Blast Markers (Small)

Set contains:

6 x small blast markers (3D printed)

8mm tall figure show for size purposes only.

https://vanguardminiatures.co.uk/shop/bl...ers-small/

And the first STL files available through Vanguard Miniatures!

Blast Markers – Download

Both large and small blast markers, supported versions included.

https://vanguardminiatures.co.uk/shop/bl...-download/

And some fleetscale bits!

Novan Fleet – Cruiser Prows

Three Novan fleet cruiser prows

1 x torpedo tubes (closed)

1 x ram (can also mount a cannon)

1 x prow cannon (can also mount a ram)

https://vanguardminiatures.co.uk/shop/no...ser-prows/

Cybershadow Fleet- Destroyer Prows

2 x Cybershadow Destroyer prows.

Resin cast model

https://vanguardminiatures.co.uk/shop/cy...yer-prows/

New tanks out!

Novan Elites – Trojan II APC

Set contains:

3 x Trojan II hulls (resin cast)

9 x rear hull hatches (resin cast) (3 of each Novan Great House symbols – reverse sides plain)

5 x forward hatches sprues (metal cast) (5 variants)

Notes:

1) These models can mount turrets such as the Hailstorm and IFV turret variants from the metal cast model range.
2) The Novan Great House symbols provided are for, The Duchy of Crescente, The Fero 3) Ascendancy and The Triumvirate of Aquilae.

https://vanguardminiatures.co.uk/shop/no...an-ii-apc/

Renegade Novan Elites – Trojan II APC

Set contains:

3 x Renegade Trojan II hulls (resin cast)

9 x rear hull hatches (resin cast) (3 variants – reverse sides plain)

5 x forward hatches sprues (metal cast) (5 variants)

Notes:

These models can mount turrets such as the Hailstorm and IFV turret variants from the metal cast model range.

https://vanguardminiatures.co.uk/shop/re...an-ii-apc/

A whole bunch of new releases!

First up:

Novan Regulars – Corsair Pattern Light Battle Strider

The Corsair light battle strider was amongst the first of a new generation of battle walkers to come from the armouries of the Great Houses of the Novan Commonwealth.

Set contains:

3 x Corsair light battle striders

Two hull weapon types included.

Two arm weapon loadouts included.

Notes:

1) Three leg poses
2) Two sensor head designs
3) Optional open cockpit torso with pilot figure
4) Model height approximately 26mms not including shoulder weapon
5) Plastic bases not included.

https://vanguardminiatures.co.uk/shop/no...e-strider/

Another tank for the Novan Regulars!

Novan Regulars – Dragon II Flame Tank

Set contains:

3 x Dragon tank hulls

6 x fuel tanks (2 variants)

6 x turrets (2 variants)

3 x bow MG’s

https://vanguardminiatures.co.uk/shop/no...lame-tank/

A new tank for the Skinners!

Skinners – Tanks With Energy Cannon Turrets

Set contains:

4 x Skinners tank hulls (4 variants)

4 x energy cannon turrets (4 variants)

https://vanguardminiatures.co.uk/shop/sk...n-turrets/

Who needs some extra turrets?

Novan Elites -Guardian Turrets

Set contains:

4 x Guardian turrets

https://vanguardminiatures.co.uk/shop/no...n-turrets/

Novan Elites -Trojan IFV Turrets

Set contains:

2 x twin HMG turrets

2 x twin laser cannon turrets

https://vanguardminiatures.co.uk/shop/no...v-turrets/

Skinners – Tank Turrets (cannon)

Set contains:

8 x Skinners cannon turrets

https://vanguardminiatures.co.uk/shop/sk...ts-cannon/

Skinners – Tank Turrets (energy cannon)

Set contains:

8 x Skinners energy cannon turrets

https://vanguardminiatures.co.uk/shop/sk...gy-cannon/

And the 3mm Novan Regulars shouldn't be forgotten either!

3mm Novan Regulars – Dragon Platoons

Set contains:

6 x dragon hulls (Warrior 1 based hull)

6 x dragon turrets

https://vanguardminiatures.co.uk/shop/3m...rs-dragon/

New Eloi warmachines!!!

Eloi Federation – Savage Banshee Detachment

The Eloi Federation makes use of a great many battle walker designs, fast, graceful and with incredible agility in comparison to our own battle striders, they are potent and deadly war machines.

This particular design is one of the most prolific machines fielded by Eloi battlegroups, Banshee’s operate in units of three with a piloted command unit and what appears to be two linked drones working in concert, although fully piloted combat teams have also been observed.

Armaments, two melee weapons held in left and right hand (sword/axe), each forearm also mount a light pulse laser, and two shoulder mounted medium rail cannon.

Set contains:

3 x Savage Banshee models.

Notes:
1. Resin printed multipart models with some modelling options
2. Approximate height, 67mms to top of “wing”
3. Plastic bases not included

https://vanguardminiatures.co.uk/shop/el...etachment/

And then there's the obligatory STL's:

6mm City Killer Type 1 – (STL Download)

https://vanguardminiatures.co.uk/shop/6m...-download/

6mm Tower Crane – (STL Download)

https://vanguardminiatures.co.uk/shop/6m...-download/

6mm Power Generator – (STL Download)

https://vanguardminiatures.co.uk/shop/6m...-download/

Various new releases!

Plastic 20mm Square Bases

20mm square plastic bases with five 6mm diameter figure recesses.

Set contains: 50 x bases

Miniatures shown for size purposes only.

https://vanguardminiatures.co.uk/shop/20...tic-bases/

Cybershadow – Logistics/Utility Crab

Set contains:

2 x logistics upper hulls

2 x crane arms

2 x lower hull

12 x legs

https://vanguardminiatures.co.uk/shop/cy...tics-crab/

Novan Logistics Set

Set contains:

3 x barrels sprues + 7 additional loose barrels

3 x stacked boxes sprues

2 x separate open boxes sprues + 4 loose boxes

2 x separate closed boxes sprues

https://vanguardminiatures.co.uk/shop/no...stics-set/

Attention, Vanguard n'a rien mis en place pour contrer la taxe de douane, du coup, plusieurs joueurs se sont retrouvés à payer 1/3 du contenu de leur commande à l'arrivée en France.

C'est bon à savoir, merci !

So this just happened...

Helian League Fleet – Leviathan Battleship

SOFT LAUNCH PRE-RELEASE PRICE, SUBJECT TO CHANGE ONCE FULL PRODUCTION COMMENCES.

3D Resin printed and resin cast model.

Set contains:

1 x Leviathan hull (3D printed)

1 x Leviathan prow (3D printed)

6 x Leviathan engine thrusters (3D printed)

3 x Helian cruiser broadsides sprues (resin cast)

4 x Helian turrets & minarets sprues (resin cast)

Notes:

1) Please view the instructional images in the product gallery about the resin minarets which require careful removal from the sprues.
2) 3D printed hull and prow are both hollowed to save on material and make for a much lighter model.
3) Model dimensions approximately, length 145mms, wing span 60mms, height 40mms not including keel fin or minarets.

https://vanguardminiatures.co.uk/shop/he...attleship/

Le City Killer est dispo : https://vanguardminiatures.co.uk/shop/6m...-download/
 

Eloi reinforcements inbound!

Eloi Federation – Tempest With Crystal Lance Turret
Citation :Set contains:

3 x Tempest grav tank hulls

3 x crystal lance turretshttps://vanguardminiatures.co.uk/shop/el...ce-turret/

Eloi Federation – Heavy Support Grav Bikes

Citation :Set contains:

4 x heavy grav bike hulls with twin ventral light rail guns

2 x heavy grav bike hulls with single ventral heavy rail gun

6 x unmanned heavy laser turrets

6 x manned heavy laser turrets

6 x way seeker passengershttps://vanguardminiatures.co.uk/shop/el...rav-bikes/